Quality control in the transfusion laboratory

The bench quality control of a hospital transfusion laboratory on the card method: which controls are due, the reagent, card and equipment checks against the laboratory's limits, the grouping and weak screening controls, acting on a failed control and the look-back, new lot acceptance and change control, the records, and UK NEQAS EQA with unsatisfactory and persistent unsatisfactory performance and CAPA. It follows the BCSH 2012 guideline, still current, and the UK NEQAS BTLP manual version 27.


Samples, issue and the laboratory13 casesGloved hands in watch mode
How to practise this procedure
  1. Watch Case 1: the gloved hands show each step at the bench, with the reason for each decision.
  2. Take the same case in Guided mode: you make every decision, with hints on.
  3. Move to other cases in Faded mode: hints on request, then withdrawn.
  4. Finish with Assessment on a case you have not watched: no hints and no retries, then read the debrief.

It prepares you and builds confidence; it does not replace supervised practice or your local SOPs.

  1. WatchSee the whole procedure done once, with the reasons.
  2. GuidedDo it yourself with hints and feedback at every step.
  3. FadedFewer prompts; the hints fall away.
  4. AssessmentNo hints. Your result goes on the record.

This procedure has 13 cases. Sign in to see them.

Before you start. Practice attempts are private to you. Only assessment results appear on your record, with the date and any critical errors. You can stop at any step and come back.