H&E staining and QC
A manual regressive Harris H&E run on a per-case example SOP card, then microscopic QC of the stained section and the control beside a reference: Q1 to Q10, one verdict, the likely cause, the primary decision and the follow-on actions, the record and the chemical waste route. Times are one manufacturer's example, and the criteria borrow the UK NEQAS description of a good slide.
Staining17 casesGloved hands in watch mode
How to practise this procedure
- Watch Case 1: the gloved hands show each step at the bench, with the reason for each decision.
- Take the same case in Guided mode: you make every decision, with hints on.
- Move to other cases in Faded mode: hints on request, then withdrawn.
- Finish with Assessment on a case you have not watched: no hints and no retries, then read the debrief.
It prepares you and builds confidence; it does not replace supervised practice or your local SOPs.
How you learn it
- Step 1WatchSee the whole procedure done once, with the reasons.
- Step 2GuidedDo it yourself with hints and feedback at every step.
- Step 3FadedFewer prompts; the hints fall away.
- Step 4AssessmentNo hints. Your result goes on the record.
This procedure has 17 cases. Sign in to see them and try cases 1 to 3 free.
Before you start. Practice attempts are private to you. Only assessment results appear on your record, with the date and any critical errors. You can stop at any step and come back.